Skip to content
Alarm.com Bed Sensor System with 2GIG Alarm Transmitter

Alarm.com Bed Sensor System with 2GIG Alarm Transmitter

by Alarm.com
SKU ADC-BOS-BC23-HW
$179.00 - $179.00
$179.00
$179.00 - $179.00
$179.00

The Alarm.com ADC-BOS-BC23-HW is a bed sensor system with a 2GIG transmitter that is ideal for safe independent homecare and elder living. The ADC-BOS-BC23-HW is clever enough to monitor the overall quality of life and acts as a lifeline. The Alarm.com wellness suite of devices provides caregivers with real-time insight into each client's present status as well as possible emergency concerns by utilizing inconspicuous wireless sensors throughout the client's living environment.

This device requires an Alarm.com account, your Alarm.com partner will need to work with you to add Alarm.com devices to your account.

Alarms247 offers DIY monitoring packages to support these devices.

Wellness Monitoring:

  • Nighttime Falls
  • Sleep Patterns & Sleeplessness
  • Sedentary Lifestyles or Wandering
  • Odd & Erratic Eating Habits
  • Infrequent or Excessive Bathroom Activities
  • Medication Adherence

Product Specifications:

  • Mat Dimensions (L x W x D): 30 x 11 x 0.3 in.
  • Cable: Gray, 18in, 26 AWG, 4 conductors sheathed, terminated with RJ9 connector
  • Electronic Enclosure: White, 3.5 in. x 2.5 in. x 0.8 in. ABS plastic
  • Electronic Signaling: Battery-powered filter circuit with integrated 345 MHz (crystal-controlled) Interlogix/Qolsys-compatible transmitter with 64-minute supervisory interval
  • Activation Weight: Minimum 50 lb. subject directly above the mat
  • Sensing Interface: Filtered, normally open (i.e. when not occupied), momentary contact switch
  • Compatibility: 2GIG
  • Material Life: Typically 2 years

Product Programming:

  • Use the Alarm.com AirFX Add a Sensor interface or the 2GIG panel interface to add the bed sensor to the account. Set the New Sensor Information as shown in the chart.
  • After the sensor is added to the system, change the sensor type to Occupancy by doing the following: From the equipment page of the Dealer Website click the Change button to the right of the sensor's name. Select the Change Sensor Type action, and update the new sensor type to Occupancy.
    • Sensor ID Select an unused ID
    • Sensor Type Alarm type no response
    • Equipment Type Contact
    • Equipment Code 0655
    • Serial Number Inside the battery compartment of the transmitter
    • Equpment Age New
    • Sensor Loop Number 2
    • Dialer Delay Disabled
    • Voice Descriptor Any
    • Reports Enabled
    • Supervised Enabled
    • Chime Any

Product Installation:

  1. Locate the sensor within 100 feet of the base station.
  2. Place the sensor on top of a mattress and below the sheets with the dark blue side facing up. The sensor should be positioned directly under the hip area when an individual is lying down. The sensor should be placed horizontally across the bed. It is recommended that the bed sensor is placed under a thin mattress pad to improve comfort.
  3. Tuck the transmitter and any excess cable between the mattress and box spring.
  4. To test the bed sensor, apply weight directly above the mat for several seconds and release. View the Event History page on the Dealer Website to confirm the sensor activity.



 

Shipping & Delivery

We ship from Canada with typical delivery times of 2-5 days to major centers. Most orders over $100 before tax ship FREE.